فارسی فارسی
   

u[sonic]

0 بازنگری ها |  ارائه نظریه
for wind direction and wind speed. The seawater resistent sensor is per­fectly heated and ideal for use under cold climate conditions. The equipment is connected by an 8 pole screw connector. The measured values can be requested over a variety of interfaces.

without moving measuring elements
2 parameters measurable
intelligent heating depending on wind speed and wind direction
easy installation, easy to maintain
Combined ultrasonic wind sensor u[sonic]
Id-No. 00.16470.000000
Measuring range wind direction: 0...359.9° • wind speed: 0...75 m/s (ANALOG) • 0...75 m/s (NMEA)
Accuracy wind direction: < 2° (> 1 m/s) RMSE • wind speed: ± 0.2 m/s RMSE (v < 10 m/s) • ± 2 % RMSE (10 m/s < v < 65 m/s)
Resolution wind direction: 0.1° • wind speed: 0.1 m/s
Response threshold 0.1 ms (adjustable for wind direction)
Output RS 485/ RS 422 • SDI-12 • Analogue: 0...20 mA · 4...20 mA · 0...5 V · 0...10 V
Protocol NMEA 0183 • WIMWV • WIMTA • SDI-12 • Modbus (update in progress)
Measuring rate 0,1...10 Hz • (internal measurement > 60 Hz)
Operating conditions -40...+70 °C (with heating -50...+70 °C) • 0...100 % r. F.
Strongest wind impact velocity 100 m/s
Supply voltage 6...60 VDC • 24 V AC/DC
Current consumption sensor: approx. 25 mA at 24 VDC typical • heater max. 13 A at 24 V AC/DC
Measuring principle Ultrasound
Heating data configurable 60 W/ 120 W/ 240 W/ max. 310 W
Dimensions Ø 199 mm • height 149 mm
Housing seawater resistant aluminium • IP 66 · IP 67
Weight approx. 2 kg
هنوز نظری برای این محصول وجود ندارد.